400
Size Plastic Stick Mount - GWS
Speed 400 size motors sit in this cradel and then are
held in by a rubberband or cable tie. Fits standard
stick mount balsa.
Price $6.00 |
|
Fibreglass 400 size motor mount
Price $5.00 |
|
Motor
Mount - Hyperion
MOTOR MOUNT for Hyperion Z40
Series, or any other motor/gearbox with 25mm mounting
pattern.
Intended for Hyperion Z40 Series motors, the mount has
two sets of motor mounting holes with 25mm spacing. The
holes are M4 to match Z40 and other large motors, so if
mounting a motor with M3 screws we recommend using
countersunk-head screws, to maintain proper centering.
Total weight of the mount with all hardware is 130g.
Adjustable for lengths from 85mm~135mm.
Includes:
1) Front Plate
2) Side Plates
8) M4 x 12mm Allen-Head Screws
8) Nyloc M4 Nuts
4) M4 x 20mm Allen-Head Screws
4) M4 Blind Nuts
Price $29.00 |
22
Series Aluminum Stick Mount - Hyperion
ALUMINUM Stick Mount for Hyperion Z22, AXI 22, Warp 4,
Mega 16 and similar - up to 200W - Only 5 grams!
Has two sets of mounting holes, spaced 16mm and 19mm,
which are countersunk to allow clearance for prop-saver
adapters or for short motor shafts. Can mount using all
four screws to Warp 4, Mega 16, and Hyperion Z22 motor
series. Motor mounting screws and stick mount screws are
not included.
Price $10.00 |
Stick
Mount - Hyperion
Laser-Cut, Pre-Assembled Stick MOTOR MOUNT for HP-Z22,
AXI 22 series, and other direct-drive motors. Only 2.5
grams!
Price $6.00 |
22
Series Outrunner Reverse Mount Kit - Hyperion
A kit to reverse mount a 22 series outrunner motor
including a 3mm collet style prop adaptor.
Fits Hyperion 2205/xx, 2209/xx, and 2213/xx motors
Price $10.00 |
|
30
Series Outrunner Reverse Mount Kit - Hyperion
Price $12.00 |
40
Series DELUX Reverse Mount Kit - Hyperion
BACKMOUNT DELUXE SET (Radial Mount) for Hyperion Z40
Series Motors
Set contains everything you need to mount your Z40
Series Hyperion Motor in BackMount (radial) fashion to
the model's firewall.
Includes:
(1) Aluminum BackMount Plate
(1) Aluminum Backmount Prop Adapter (for M8 Prop Shaft)
(1) Setscrew Retaining Collar M6
(1) Aluminum Spacer Set (spacing adjustable from 5mm to
30mm max)
4x 5mm spacer
4x 10mm spacer
4x 15mm spacer
(1) Mounting Screw Set (4mm Allen Head type)
4x 25mm
4x 30mm
4x 50mm
(4) 4mm Blind nuts
(1) 6mm Front Mount Collet Adapter (for M8 Prop Shaft) -
free bonus!
Price $44.00 |
40
Series Outrunner Reverse Mount Kit - Hyperion
Set contains Z40 Series Motor BackMount (radial mount)
Includes:
(1) Aluminum BackMount Plate
(1) Aluminum Backmount Prop Adapter (for M8 Prop Shaft)
(1) Setscrew Retaining Collar M6
(1) Required Screws
Price $30.00 |
AXI
22xx/xx Reverse Mount Radial Set
Reverse mount kit for 22 series motors. Includes X-mount
for screwing to firewall and prop mount that screws on
the rear of the motor.
Price $25.00 |
AXI
22xx/xx Reverse Mount Prop Saver
This is just the prop saver that srews on to the rear of
the 22 series motor. Props are secured with a rubber
band. Designed for GWS or APC props.
Price $12.50 |
|
AXI
2820/xx Reverse Mount Radial Set
Price $38.00 |
